Posted by : Unknown
Tuesday, 3 December 2013
Evaluation
We were assigned the
task to create a film of a short conversation between two people; this film has
to demonstrate three techniques; One being the 180-degree line, which is a rule in film
making that states within a scene subjects,
such as actors or props, should always have the same positioning either on the
left or right side of the frame throughout the entirety of a scene, this is
used to prevents disturbances in the continuity. Another being match on action, which is a technique were shots are connect in a way that presents the
actor finishes off an action in one shot that was started in a previous one.
This allows for smooth continuity between shots. And finally shot-reverse-shot, used mainly in film for
conversation scenes between two characters, one actor is shown looking at another actor, who is often
off-screen, and then the other actor is shown looking back. The opposite
directions the actors are looking in makes the viewer assume they are looking
at each other.
During the planning
process of our film, we did a number of things, firstly we created a script
using Celtx, using this program allowed us to write in script format making the
process of production extremely time efficient, however the only downside to
Celtx was the fact we were unable to print our script document directly from
the program, and therefore we had to take screenshots of the script document
open in Celtx and then print these screenshots, this was not time consuming
however having to print the script this way meant the quality of the print was
lowered due to us having to crop and enlarge the script from the original
screenshot.
Secondly, we produced
a storyboard, we did this so we could visualise what we planned in the script.
Creating a storyboard was very useful as we could also use it to plan where in
the film we would incorporate the match on action, shot-reverse shot and
180-degree line. It also gave us an idea of what location the film would need
to be shot in, and where the subjects in the film needed to be in relation to the
set and camera, having a firm plan of these requirements greatly helped us to
shoot the film quickly and correctly with little need to keep re-taking shots.
Then we prepared a
shot list, this included: A long shot of one of the actors coming down the corridor
and placing her hand on the door handle, a close up of her hand on the door
handle (to demonstrate the match on action) a mid two shot of the two actors
facing one another, and finally a shot-reverse-shot during their conversation.
Finally we did a risk
assessment of the location we chose to shoot the film, which was a corridor and
classroom located in college. Using the storyboard we checked the routs around
the set of which our actors would be walking was clear from any objects such as
wire that could cause a trip hazard. This was to ensure that the actors could
mover around the set easily and prevented any chance of injury which could have
halted or slowed down production of the film.
Our final piece was a
short conversation between two friends about last night TV, the film showed one
subject walking down a corridor, into a classroom and then sitting down to talk
with her friends briefly before they both stand up and exit. We filmed our
piece using a camcorder attached to a tripod; we used the tripod to insure our
shots were stable, well framed and level. Production ran very smoothly with
only a few problems, though these were only minor things such as people walking
into shot as we were filming on a public corridor, however this was easily
overcome by having a group member stood out of the site of the camera
preventing anyone from entering the corridor until we got the shot we needed.
The only other problem we faced was the fact the location we chose to shoot the
film was relatively small, and therefore we found it difficult to set up the
tripod in a way that allowed us to achieve the shot we needed, as the short
distance between the subjects and the camera meant sections were cut off and
the framing looked un professional, we overcame this problem by repositioning
the subjects closer to the wall and setting us the tripod as far away from them
as possible while still keeping the camera central, this meant those of us working the camera were given no room
to stand behind the tripod as it was positioned straight in front of a desk we
could not move, so to operate it we had to sit on the table and tilt the screen
so we could insure the cameras position was correct in a safe manor. This work
very well and we achieved the shot we wanted on the first take. Our match on
action was a very successful feature in our film, we took much care in insuring
the continuity was flawless between the shots, such as making sure the actors
cloths and hair hung in the same way and that the actor used the same hand to
open the door on both takes. The
care we took while filming meant once we had finished editing we had a near
perfect example of match on action in our final piece.
We used the editing
software Final Cut Express; this allowed us to achieve precise cuts between
shots, which made the film look professional and fluid. Using Final Cut was
also useful as it was very easy to extract any unwanted footage from final
piece. Sound editing in final cut was also very easy, we created sound bridges
between shots which made the audio drift fluidly between shots and overall
created a effect that makes the viewer begin to forget they are watching a
movie, as it cancels out any abrupt sound cuts that notify viewers to the edits
between shots.
Demonstration of shots
used in our project:
1) Hand on door handle
(long-shot)
2) Hand on door handle (close up)
3) Mid two shot
4) Shot-reverse shot
By Amirah Newton




