Evaluation
We were assigned the
task to create a film of a short conversation between two people; this film has
to demonstrate three techniques; One being the 180-degree line, which is a rule in film
making that states within a scene subjects,
such as actors or props, should always have the same positioning either on the
left or right side of the frame throughout the entirety of a scene, this is
used to prevents disturbances in the continuity. Another being match on action, which is a technique were shots are connect in a way that presents the
actor finishes off an action in one shot that was started in a previous one.
This allows for smooth continuity between shots. And finally shot-reverse-shot, used mainly in film for
conversation scenes between two characters, one actor is shown looking at another actor, who is often
off-screen, and then the other actor is shown looking back. The opposite
directions the actors are looking in makes the viewer assume they are looking
at each other.
During the planning
process of our film, we did a number of things, firstly we created a script
using Celtx, using this program allowed us to write in script format making the
process of production extremely time efficient, however the only downside to
Celtx was the fact we were unable to print our script document directly from
the program, and therefore we had to take screenshots of the script document
open in Celtx and then print these screenshots, this was not time consuming
however having to print the script this way meant the quality of the print was
lowered due to us having to crop and enlarge the script from the original
screenshot.
Secondly, we produced
a storyboard, we did this so we could visualise what we planned in the script.
Creating a storyboard was very useful as we could also use it to plan where in
the film we would incorporate the match on action, shot-reverse shot and
180-degree line. It also gave us an idea of what location the film would need
to be shot in, and where the subjects in the film needed to be in relation to the
set and camera, having a firm plan of these requirements greatly helped us to
shoot the film quickly and correctly with little need to keep re-taking shots.
Then we prepared a
shot list, this included: A long shot of one of the actors coming down the corridor
and placing her hand on the door handle, a close up of her hand on the door
handle (to demonstrate the match on action) a mid two shot of the two actors
facing one another, and finally a shot-reverse-shot during their conversation.
Finally we did a risk
assessment of the location we chose to shoot the film, which was a corridor and
classroom located in college. Using the storyboard we checked the routs around
the set of which our actors would be walking was clear from any objects such as
wire that could cause a trip hazard. This was to ensure that the actors could
mover around the set easily and prevented any chance of injury which could have
halted or slowed down production of the film.
Our final piece was a
short conversation between two friends about last night TV, the film showed one
subject walking down a corridor, into a classroom and then sitting down to talk
with her friends briefly before they both stand up and exit. We filmed our
piece using a camcorder attached to a tripod; we used the tripod to insure our
shots were stable, well framed and level. Production ran very smoothly with
only a few problems, though these were only minor things such as people walking
into shot as we were filming on a public corridor, however this was easily
overcome by having a group member stood out of the site of the camera
preventing anyone from entering the corridor until we got the shot we needed.
The only other problem we faced was the fact the location we chose to shoot the
film was relatively small, and therefore we found it difficult to set up the
tripod in a way that allowed us to achieve the shot we needed, as the short
distance between the subjects and the camera meant sections were cut off and
the framing looked un professional, we overcame this problem by repositioning
the subjects closer to the wall and setting us the tripod as far away from them
as possible while still keeping the camera central, this meant those of us working the camera were given no room
to stand behind the tripod as it was positioned straight in front of a desk we
could not move, so to operate it we had to sit on the table and tilt the screen
so we could insure the cameras position was correct in a safe manor. This work
very well and we achieved the shot we wanted on the first take. Our match on
action was a very successful feature in our film, we took much care in insuring
the continuity was flawless between the shots, such as making sure the actors
cloths and hair hung in the same way and that the actor used the same hand to
open the door on both takes. The
care we took while filming meant once we had finished editing we had a near
perfect example of match on action in our final piece.
We used the editing
software Final Cut Express; this allowed us to achieve precise cuts between
shots, which made the film look professional and fluid. Using Final Cut was
also useful as it was very easy to extract any unwanted footage from final
piece. Sound editing in final cut was also very easy, we created sound bridges
between shots which made the audio drift fluidly between shots and overall
created a effect that makes the viewer begin to forget they are watching a
movie, as it cancels out any abrupt sound cuts that notify viewers to the edits
between shots.
Demonstration of shots
used in our project:
1) Hand on door handle
(long-shot)
2) Hand on door handle (close up)
3) Mid two shot
4) Shot-reverse shot
By Amirah Newton
The brief for the preliminary exercise was to film a short conversation between two people demonstrating shot-reverse-shot, 180 degree line and match on action.
Shot-Reverse-Shot is used in film making where it shows the first character looking at the second character and then it changes to show the second character looking at the first character.
The 180 Degree Line Of Action is a guideline used in film making to help the audience associate who the main characters and objects are in a frame.
Match On Action is when you distract the audience from noticing a change in shot by using movement.
To plan for our film, we created a script on Celtx which was good because it helped to format our idea into a script form. It allowed us to easily split up the dialogue, setting and actions clearly like how they are done for professional filming. We also drew a storyboard and created a shot list so that when we came to actually filming the piece, we knew exactly what we were doing and how it should look. Location research was done as well so that the film looked believable and we had enough room to take all of the shots that we needed. The final part of planning was to do a risk assessment. This involved checking the location for electrical cables etc to make sure that we wouldn't get hurt whilst shooting the film.
During filming of the piece, we had a few problems that we had to overcome. For example, we kept laughing whilst saying our lines so we had to film a few of the shots more than once. When we had composed ourselves and gotten used to being in front of the camera, we managed to do it without laughing and so we were able to film the shots we needed. Another problem we encountered was that we kept doing things differently in each shot without knowing (e.g. we'd sit down a different way to how we sat down in a different shot) so once we had noticed that this is what had happened, we re-filmed the shots that needed re-filming. Apart from these problems, filming was quite successful. We managed to shoot the exercise quite quickly and we were happy with how well our filming went.
To edit our piece, we used Final Cut Express. We shortened and matched up the different shots so that the cuts were fluent and we made sure that match on action was represented well. Also, we created small sound bridges so that the cuts weren't too noticeable and it has great impact on the audience. The final thing we did whilst editing was add titles to the film so that it looked more professional and didn't just go straight in to the action.
To demonstrate the first technique, we flimed the conversation over one character's shoulder and then filmed the whole concersation again over the second character's shoulder so that we could take bits from both and piece them together to show shot-reverse-shot. To show the 180 degree line, we made sure that we always filmed on one side of the characters so that we wouldn't cross the line and confuse the audience. Finally, to demonstrate match on action, we edited our film so that when put together, action diverted the audience from noticing the cuts. For example, match on action was used when the character opened the door and when the character sat down on the chair.
Shot-Reverse-Shot is used in film making where it shows the first character looking at the second character and then it changes to show the second character looking at the first character.
The 180 Degree Line Of Action is a guideline used in film making to help the audience associate who the main characters and objects are in a frame.
Match On Action is when you distract the audience from noticing a change in shot by using movement.
To plan for our film, we created a script on Celtx which was good because it helped to format our idea into a script form. It allowed us to easily split up the dialogue, setting and actions clearly like how they are done for professional filming. We also drew a storyboard and created a shot list so that when we came to actually filming the piece, we knew exactly what we were doing and how it should look. Location research was done as well so that the film looked believable and we had enough room to take all of the shots that we needed. The final part of planning was to do a risk assessment. This involved checking the location for electrical cables etc to make sure that we wouldn't get hurt whilst shooting the film.
During filming of the piece, we had a few problems that we had to overcome. For example, we kept laughing whilst saying our lines so we had to film a few of the shots more than once. When we had composed ourselves and gotten used to being in front of the camera, we managed to do it without laughing and so we were able to film the shots we needed. Another problem we encountered was that we kept doing things differently in each shot without knowing (e.g. we'd sit down a different way to how we sat down in a different shot) so once we had noticed that this is what had happened, we re-filmed the shots that needed re-filming. Apart from these problems, filming was quite successful. We managed to shoot the exercise quite quickly and we were happy with how well our filming went.
To edit our piece, we used Final Cut Express. We shortened and matched up the different shots so that the cuts were fluent and we made sure that match on action was represented well. Also, we created small sound bridges so that the cuts weren't too noticeable and it has great impact on the audience. The final thing we did whilst editing was add titles to the film so that it looked more professional and didn't just go straight in to the action.
To demonstrate the first technique, we flimed the conversation over one character's shoulder and then filmed the whole concersation again over the second character's shoulder so that we could take bits from both and piece them together to show shot-reverse-shot. To show the 180 degree line, we made sure that we always filmed on one side of the characters so that we wouldn't cross the line and confuse the audience. Finally, to demonstrate match on action, we edited our film so that when put together, action diverted the audience from noticing the cuts. For example, match on action was used when the character opened the door and when the character sat down on the chair.
180 degree line of action:
When filming a scene/film the person in control of the camera angles has to keep in mind the 180 degree rule. This means there is an imaginary line (called the axis) down the centre of the shot where the characters or objects are. The camera has to stay on one side of the axis (as shown in the diagram) for every shot in the scene. If the camera crosses the axis, it is called jumping the line or crossing the line.
Shot-reverse-shot
Match on action
Match on action, sometimes referred to as cutting on action, refers to editing techniques where the editor cuts from one shot to another view that matches the same action. Sometimes even though the shots have been taken at different times they can still be used to give this effect.
When filming a scene/film the person in control of the camera angles has to keep in mind the 180 degree rule. This means there is an imaginary line (called the axis) down the centre of the shot where the characters or objects are. The camera has to stay on one side of the axis (as shown in the diagram) for every shot in the scene. If the camera crosses the axis, it is called jumping the line or crossing the line.
Shot-reverse-shot
Shot-reverse-shot is the technique where each character is shown looking directly at each other. Because of the angles in which the shots are filmed it makes the person viewing the scene assume that the characters are looking at each other. This is used particularly in scenes when characters are having conversations.
Match on action
Match on action, sometimes referred to as cutting on action, refers to editing techniques where the editor cuts from one shot to another view that matches the same action. Sometimes even though the shots have been taken at different times they can still be used to give this effect.
180 Degree Line Of Action
Shot-Reverse-Shot
Shot-Reverse-Shot is used in film making where it shows the first character looking at the second character and then it changes to show the second character looking at the first character.
Match On Action
Match On Action is when you distract the audience from noticing a change in shot by using movement. This makes it flow better.









